Termékek vásároljon hegesztő gázt közelben (13)

The inverter machine VIKING 500A PRO is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of VIKING 500A PRO devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 500А (100% at 420 A). The welding inverter machine can be used at low temperatures and reduced supply voltage. Adjustable functions of hot start and arc reheat imply the ability to adjust the operation of the device with minimal spattering and allow you to perform work in any spatial position of the electrode and welded surfaces. Max power, kW:17 Voltage, V:380 Max current - Min current, А:40 - 500 Open circuit voltage, V:80 Electrode diameter, mm:1,6 - 6 Weight, kg:27 Duration of on at maximum current, %:60 Brand name :VIKING Country of Origin :Russia

Fiber optic welding machine L-WELD is designed to weld metal plates and pipes. Fiber laser creates a high-frequency beam, which is focused in one spot. This concentrated laser source provides thin, deep welding and is of high speed. Fiber optic:1 T-weld, Butt, Overlapping weld:2 welding stainless steel, aluminum, copper, gold, silver, chromium, nickel, titanium and other metals:3 System of welding consumables automatic supply:4 Safe operation of the equipment:5 easy operation:6 No deformation, increased strength of the weld:7 long life of the equipment:8 weld does not need additional treatment:9 Smooth weld:10 High efficiency:11 Uniform weld area without holes:12

During the construction of an industrial facility, much attention is paid to the strength of the service pipelines fasteners. It is also necessary to provide reliable connection of all units of industrial equipment with the pipelines. In this case, it is not always possible The use of a permanent welded joint is not always possible, therefore, there are various types of weld-free tight joints. FLANGE JOINT COMPONENTS At present, one of the most effective connections used in industrial facilities is a flange joint. This is an airtight connection that provides high structural integrity, consists of two flanges, fasteners (studs or bolts, washers, nuts) and gaskets. An important matter in choosing a set of flanges is tightness. The gasket material must have good elasticity, strength, resistance to the operating temperature conditions and to the media with which direct contact is expected. For flange joints, Villina company uses the following types

Application: ➢ Water-soluble paints, primers, varnishes ➢ Paste-like putties, solutions, plasters ➢ Adhesives and sealants ➢ Tinting pastes ➢ Insulation solutions ➢ Self-leveling ground material ➢ Tile sealant ➢ Construction ➢ Insulation materials ➢ Production of san products.hygiene ➢ Rubber, plastic, plastics ➢ Welding electrodes and fluxes ➢ Cleaning and abrasive materials ➢ Agrochemistry ➢ Filter media ➢ Decorative coverings

Operating from a single-phase 220 V network, the industrial welding inverter ТОРУС-250 Extra has an increased arc welding current up to 250 Amperes and, therefore, an increased percentage of operating time (TP). This allows performing continuous welding works: the device provides TP = 100% at an arc welding current of up to 225 Amperes (electrodes with a diameter of 5 – 6 mm). The power consumption when welding with “household” electrodes with a diameter of 3 mm is such that the device can be connected to a regular household outlet. Thus, the ТОРУС-250 Extra device is universal for industrial facilities and for cottage areas. Max power, kW:8,2 Max current - Min current, А:40 - 250 Voltage, V:220 Open circuit voltage, V:65 Duration of on at maximum current, %:60 Weight, kg:5,7 Brand Name :Торус Country of origin:Russia

Welding inverters of the PRO series are light in weight and dimensions. The metal housing reliably protects the internal components, making it suitable for use on the construction site. Inverters are capable to operate with all brands of stick electrodes from 1.6 to 5 mm and 6 mm (VIKING 250PRO, VIKING 270PRO), including the УОНИ 13/55 brand. The minimum arc welding current is 30 A, the maximum one corresponds to the model. TP at maximum current for all models is 60%. Mains voltage range is 160 ... 260 V. Max power, kW:6,2 Voltage, V:220 Max current - Min current, А:30 - 200 Min input voltage, V:160 Electrode diameter, mm:1,6 - 6 Duration of on at maximum current, %:60 Weight, kg:5,5 Brand name :VIKING Country of Origin :Russia

The Russian-manufactured inverter machine ТОРУС-320 is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The metal housing is equipped with large ventilation holes in order to prevent overheating of internal components. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of ТОРУС-320 devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 320A (100% at 300A). The welding inverter machine can be used at low temperatures and reduced supply voltage. Max power, kW:11 Max current - Min current, А:40 - 320 Voltage, V:380 Open circuit voltage, V:69 Duration of on at maximum current, %:60 Weight, kg:10,3 Country of origin:Russia Brand Name :Торус

The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator Max power, kW:24,7 Max current - Min current, А:50 - 500 Voltage, V:380 Burner operating mode:2-stroke / 4-stroke Welding wire diameter, mm:1.0 - 1.6 Coil diameter, mm:300 Feed mechanism:External Brand Name :VIKING Country of origin:Russia

ТОРУС-200 is a modern welding inverter device based on a digital high-frequency mains voltage transducer. The device is designed for electric arc welding of low-carbon, alloy and stainless steels, it can operate in TIG and MMA modes. Obtaining high-quality welding joints does not require high qualifications from the employee, which is important for novice welders. In short-circuit mode, the device almost does not consume current, which allows it to be powered from petrol power units with a capacity of 4 kW (6 kVA) and a household network with slumps up to 165 V. ТОРУС-200, like other inverter welding machines of the ТОРУС line, allows you to get welding with stable parameters. It is characterized by: small weight – 5 kg, high performance factor and the ability to work with electrodes with a thickness from 1.6 to 5 millimeters. In addition, the ТОРУС-200 welding inverter is designed for continuous operation not only indoors, but also outdoors. Max power, kW:6,2 Max current - Min current, А:30 - 200 Voltage, V:220 Min input voltage, V:165 Open circuit voltage,V:65 Duration of on at maximum current, %:60 Weight, kg:5 Brand Name :Торус Country of origin:Russia

Welding inverters of the PRO series are light in weight and dimensions. The metal housing reliably protects the internal components, making it suitable for use on the construction site. Inverters are capable to operate with all brands of stick electrodes from 1.6 to 5 mm and 6 mm (VIKING 250PRO, VIKING 270PRO), including the УОНИ 13/55 brand. The minimum arc welding current is 30 A, the maximum one corresponds to the model. TP at maximum current for all models is 60%. Mains voltage range is 160 ... 260 V. Max power, kW:9 Max current - Min current, А:30 - 270 Voltage, V:220 Min input voltage, V:160 Electrode diameter:1,6 - 6 Duration of on at maximum current, %:60 Weight, kg:6 Brand Name :VIKING Country of origin:Russia

TORUS-255 has the widest possible range of arc welding currents (from 20 to 255 A), which makes it possible to use it both for welding very thin metals, including in the TIG mode (welding with non-consumable electrode), and for continuous welding of large metal structures using an electrode up to 6 mm in diameter. The operating margin in the ТОРУС-255 device is such that it can be effectively used not only for the MMA and TIG modes, but also in the surfacing and cutting modes. At the same time, the weight of the device itself is traditionally not big – only 5.7 kg. Like all devices of the ТОРУС line, ТОРУС-255 has increased reliability with all its maximum parameters. A 3-year manufacturer’s warranty is a guarantee of its high performance in the most severe operating conditions. Max power, kW:8,2 Max current - Min current, А:20 - 255 Voltage, V:220 Min input voltage, V:165 Open circuit voltage,V:65 Duration of on at maximum current, %:60 Brand Name :Торус Country of origin:Russia

The VIKING TIG 315 AC / DC PRO argon-arc welding machine is a one-piece structure, designed for power supply from a three-phase 380 V network and produces 315 A at a load of 60%. Special software functions significantly increase the performance factor of the device: HOT-START, ARC-FORCE, ANTI-STICK functions. Specifications: Voltage: V380 Max power: kW5.5 Max current: A315 Operating mode: DC/AC Product class: Professional Burner operating mode: 2-stroke / 4-stroke Pulse mode: yes Availability of the button for saving the selected parameters “MEMORY”, allows you to program 10 parameters for each welding mode (AC/DC). PULSE welding mode is a pulsed consumable-electrode welding (Possibility to use both direct current (DC) and alternative (AC). Waveform selection function (available in AC mode). Dot welding mode 2T and 4T. Adjusting of smooth drop of the terminating current. Adjustable inductance. Max power, kW:8,4 Voltage, V:380 Max current - Min current, А:5 - 315 Open circuit voltage, V:67 Duration of on at maximum current, %:60 Electrode diameter, mm:1,6 - 6 Burner operating mode :2-stroke / 4-stroke Weight, kg:38 Brand name :VIKING Country of Origin :Russia

Horizontal canned pumps with welded bodies (Villina-GNGC) are designed for transit in stationary conditions of neutral, corrosive, toxic, as well as explosive and fire hazardous liquids, the vapors of which can form explosive mixtures with air. These pumps are used in petrochemical, petroleum refining and other industries. single-stage or multi-stage version of the unit design (increased discharge pressure, in contrast to back pull-out pumps); high efficiency of the impellers; a possibility to pump contaminated liquids with 100% tightness (for pumping units with combined seals); Temperature of the pumped fluid: up to +420°С.